REPLACEMENT
(1) Wiper Arm (3) Wiper Blade
(2) Wiper Fixing Lever
H11O649A
1. Set the wiper upright to replace the
wiper blade.
2. Hold the blade with one hand and
press the blade fixing lever with
the other hand to separate the
blade from the xing part.
(1) Wiper Blade
H11O650A
3. Lower the blade and pull out the
blade by moving it in the shape of
"U". (Arrow direction in the gure)
(1) Wiper Arm (2) Fixing Lever
H11O651A
4. Set a new wiper blade horizontal
so that the fixing lever is facing
down. Align the wiper arm with
the xing lever slot and lower the
blade.
When the wiper blade is sepa-
rated, the wiper arm should
not contact with the wind-
shield or rear glass. The glass
can be damaged.
•
CAUTION
To Next Page
Loading...
