Driving with high beam head
light disturbs the approach-
ing vehicle’s visibility for safe
driving. Use the high beam
head lights only if necessary.
•
WARNING
TURN SIGNAL LIGHT SWITCH
(1) Turn signal light switch
(A) Left turn (B) Right turn
The turn signal lights are used when
turning the vehicle left or right. Pull-
ing the lever up blinks the left turn
signal light while pushing the lever
down blinks the right turn signal light.
TE1O408A
The turn signal light lever is not
the self-return type. Therefore,
make sure to return the lever
manually after turning the vehicle.
The turn signal lamps can be op
-
erated without the key inserted.
•
•
NOTE
ROPS
(1) Head Light Switch
(A) OFF (B) Position Lamp
(C) Low Beam ON (D) High Beam ON
(1) Horn Switch
The horn switch can be operated
without the key inserted. Pressing
this switch sounds the horn.
HORN SWITCH
TE1O409A
To Next Page
Loading...
