ADDITIONAL LIQUID TYPE WEIGHT
It is possible to inject water and cal-
cium solution into the tire to use it as
a ballast.
If one liter of water is mixed with 0.4
kg of calcium, this liquid does not
freeze down at -45
℃
(-49
℉
).
For a tire without a tube, fill it with
water and calcium solution at least to
the valve stem level (75 %) with the
valve stem.
If the tire without a tube is not lled
with water and calcium solution suf-
ciently, a part of the ream is exposed,
resulting in corrosion.
For a tire with a tube, ll it up to 90%
of its level.
The liquid injection should be
performed only by a qualified
service personnel.
For detailed information, contact
your local KIOTI Dealer.
•
•
NOTE
If the liquid ballast is used, in-
ate the tire 0.14bar (2psi) more
than the specied pressure. This
is to compensate for the ventila-
tion symptom which occurs while
the tire is moving.
•
NOTE
Attach only required amount
of weight.
Unnecessary weight can result
in poor braking performance,
rapid wear of the brake disc,
shortened axle life, and in-
crease in fuel consumption.
•
•
IMPORTANT
To Next Page
Loading...
Need help?
General
