KIP 2300 - Page 13

Chapter 1 Before Use 1-6
Power source Voltage
100 - 120V +6%/-10%
200 - 240V +6%/-10%
Note : Scanner accepts any voltage so far as it is within 100-240V
+6%/-10%.
Frequency
50 or 60Hz
Max. power consumption Less than 120W
Average power
consumption
(US : 120V)
- During scanning 120W
- Stand by 50W
- In Power Save Mode 0W
(EUR / ASIA : 200-240V)
- During scanning 120W
- Stand by 50W
- In Power Save Mode 0W
Dimension 1,366mm (Width) x 543mm (Depth) x 318mm (Height)
NOTE : Original Guides, Original Tray and Pedestal are excluded.
Weight About 76kg
Environmental conditions Temperature
10 - 32 degrees centigrade
Humidity
15 - 85%RH (No dew)
(Recommended)
23 degrees centigrade and 60% RH (No dew)
Acoustic noise Stand by Less than 55db
During scanning Less than 60db
Impulse sound Less than 70db
Option Pedestal (Scanner Stand)
Stacking capacity of trays Front Steel Tray
- Max. number of originals : about 20 sheets of 36”x48”
- Max. weight of originals : 2.2kg/square meter
Rear Steel Tray
- Max. number of originals : about 50 sheets of 36”x48”
- Max. weight of originals : 5kg/square meter
NOTE
Specifications may change without notification.