Chapter 1 Before Use 1-5
1. 3 Specifications
Model KIP2300 Image Scanner
Type Desktop scanner
Reading sensor 3 CCD Reduction Optical System
(3 CCD of RGB 7450 pixels)
Optical Resolution Main scanning (horizontal) direction 600dpi
Sub scanning (vertical) direction 600dpi
Range of Scan Resolution 100 – 2400dpi
Scan mode Binary mode
4 bit gray mode
8 bit gray mode
24 bit color mode
Scanning method Sheet through type
Scan speed Monochrome/Gray mode
100dpi : 12”/sec (lower feeder), 5”/sec (upper feeder)
600dpi : 5”/sec (lower feeder), 5”/sec (upper feeder)
2400dpi : 1.25”/sec (lower feeder), 1.25”/sec (upper feeder)
Color Mode
100dpi : 12”/sec (lower feeder), 5”/sec (upper feeder)
600dpi : 2”/sec (lower feeder), 2”/sec (upper feeder)
2400dpi : 0.5”/sec (lower feeder), 0.5”/sec (upper feeder)
Original type Sheet type & board type
- Upper original feeder can accept 0.05-0.1mm.
- Lower original feeder can accept 0.05-16.0mm.
Maximum reading width 914.4mm (36”)
Transportable original
length
Max. 16,000mm
Min. 210mm
NOTE : 48” is the maximum length for “board type” original.
Transportable original
width
Max. 1066.8mm (42”)
Min. 210mm
Thickness of original Max. 16mm
Min. 0.05mm
Placement of original Centered
Light source White LED
Warm up time Less than 10 seconds
Memory 256MB DDR DIMM
Operation system Windows Vista, XP & 2000
Interface USB 2.0 : for controlling & image data transfer
HIL (High-speed Image Link) : for image data transfer
NOTE : Connected PC needs to have a PCI Express card slot for
installing the HIL Add-in Card
Memory capacity From 256MB (standard) to 2GB (Option)
NOTE
Specifications may change without notification.
To Next Page
Loading...
