Chapter 2 Basic Operation 2-1
Chapter 2
Scanner Hardware Operation
page
2. 1 Turning ON the KIP2300 2- 2
2. 2 Scanning an Original 2- 4
2. 2. 1 Scanning a sheet type original 2- 4
(1) Using the Upper Original Feeder 2- 4
(2) Using the Lower Original Feeder 2- 7
2. 2. 2 Scanning a board type original 2-10
2. 3 Cancellation of Current Scan 2-18
2. 2 Turning OFF the KIP 2300 2-19
2. 5 Auto Power OFF 2-20
2. 6 Removal of Trays 2-21
2. 6. 1 Front Steel Trays 2-21
2. 6. 2 Rear Steel Trays 2-24
To Next Page
Loading...
