4
CAUTION
Do not install the machine at the following places.
1. Humidified or dusty place.
2. Unstable floor. (When the machine comes down, it may cause the
injury.)
1. Unplug the machine before you move it to another place. Otherwise, the
power cord may be damaged and may result in a fire or receiving an
electric shock.
2. If nobody operates the scanner in the night time, make sure to turn it off
for the safety.
3. If nobody operates the machine for a long time during consecutive
holidays, make sure to turn it off for the safety.
4. Nothing should be put near the power plug so as to disconnect it quickly
anytime.
Be careful not to catch your hand between Upper Unit and Main Unit when
you close the Upper Unit.
LED Safty (Safty of LED Products)
“Caution - Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure”
As the LED on the Light Source PCBs (PW12130 & PW12131) are Class 2 LED singularly, it
is not allowed for using it with disassembling or converting.
Classification of LED product :
- CLASS 1 LED PRODUCT
IEC 60825-1:2001
EN 60825-1:1994 + A2:2001 + A1:2002
- Maximum class of the embedded LED : CLASS 2 (WHITE LED, Maximum power : 4.0mW)
To Next Page
Loading...
