Chapter 1 Before Use 1-8
1. 4. 3 Scanner part
Subject Specification
Scanning method Contact Image Sensor (CIS)
(5 pieces of A4 sized CIS)
Light source LED (R/G/B)
Setting of original Face up
Starting point of scan Center
Scan width Max: 914.4mm / 36”
Min : 210mm
Scan length Max: 6,000mm / 19.7ft (Including the margin area)
(If the print is longer than 6,000mm, its image quality or the
reliability of paper feeding is not guaranteed.)
Min : 210mm / 8.5” (Including the margin area)
Margin area 3mm from leading, trailing and both side edges
Optical resolution 600dpi
Digital resolution 200 / 300 / 400 / 600 dpi
Original transportation Sheet through type
Transportable original
thickness
Max: 1.60mm
Min : 0.05mm
Scanning speed
(600 dpi, normal quality)
(max)
Monochrome : 65mm/s
Grayscale : 65mm/s
Color : 22mm/s
The actual speed may vary by the scan software.
NOTE
The above specifications are subject to change without notice.
NOTE
Image quality for an original with 0.25mm or thicker is
guaranteed only in a standard size even the scanner
physically accepts it.
To Next Page
Loading...
