What causes no or low AC output on Kipor IG2000 Portable Generator?
For no or low AC output on your Kipor Portable Generator: * Replace the AC receptacle. * Check and repair the stator wire harness or replace the stator; if the rotor inner magnetism decreases, replace the rotor. * Replace the inverter unit.
General| Rated Power | 1.6 kW |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Fuel Type | Gasoline |
| Starting System | Recoil |
| Weight | 22 kg |
| Engine Type | 4-stroke, OHV |
| Noise Level | 54-59 dB(A) |
| Continuous Operation Time | 4 h (at rated load) |
Details dimensions, engine type, displacement, and generator specifications.
Outlines AC/DC output, voltage, frequency, power factor, and noise levels.
Explains why correct servicing is crucial for safety and engine reliability.
Lists essential safety guidelines for maintenance and repair operations.
Specifies acceptable tolerances and limits for engine component measurements.
Provides guidance for diagnosing and resolving common engine issues.
Outlines recommended service intervals for key engine components.
Details procedures for checking and replacing the engine oil.
Covers inspection, cleaning, and maintenance of the air filter element.
Guides on inspecting, cleaning, gapping, and replacing the spark plug.
Describes how to inspect and adjust engine valve clearances.
Guides on removing and installing the carburetor and its components.
Details inspection procedures for receptacles, switches, and ignitor.
Covers inspection of ignition coil resistance and rectifier functionality.
Details inspection of ignition, charging, and sub windings.
To Next Page
