Kipor IG3000E - Maintenance Schedule

17
7. MAINTENANCE
The purpose of the maintenance and adjustment schedule is to keep the generator in the
best operating condition.
Inspect or service as scheduled in the table below.
■ Shut off the engine before performing any
maintenance. If the engine must be run, make sure the
area is well ventilated. The exhaust contains poisonous
carbon monoxide gas.
■ Use genuine Kipor parts or their equivalent. The use of
replacement parts which are not of equivalent quality
may damage the generator.
Maintenance Schedule
REGULAR SERVICE PERIOD (1)
EACH
USE
FIRST
MONTH
OR 20
HRS
EVERY 3
MONTHS
OR 50
HRS
EVERY 6
MONTHS
OR 100
HRS
EVERY
YEAR
OR 200
HRS
ITEM
Perform at every indicated month or
operating hour interval, whichever
comes first.
Engine oil
Check level
○
Change
○
○(2)
Air cleaner
Check
○
Clean
○(2)
Spark plug
Clean-adjust
○
Spark plug
Clean
○
Sediment cup
Clean
○
Valve clearance
Check
○(3)
Fuel tank and filter
Clean
Every 2 years (Replace if necessary) (3)
NOTE: (1) Log hours of operation to determine proper maintenance.
(2) Service more frequently when used in dusty areas.
(3) These items should be serviced by an authorized dealer, unless the owner
has the proper tools and is mechanically proficient. See the Shop Manual.