EasyManua.ls Logo

Kipor IG3000E - Pre-Operation Check; Engine Oil Check

Kipor IG3000E
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
3. PRE-OPERATION CHECK
CAUTION
Check the generator on a level surface with the engine stopped.
3.1 Engine Oil
NOTE
Using non detergent oil or 2-stroke engine oil could shorten the engine's service life.
Use a high-detergent, premium quality 4-stroke engine oil, certified to meet or
exceed U.S. automobile manufacturer's requirements for API Service Classification SG,
SF.
Select the appropriate viscosity for the average ambient temperature in your area.
SAE Viscosity Grades
Ambient Temperature
Check the engine oil level
Remove the oil filler cap, and wipe the dipstick with a clean rag. Check the oil level by
inserting the dipstick in the filler hole without screwing it in.
NOTE
The Low Oil Alarm System will automatically stop the engine before the oil level falls
below the safe limit. However, to avoid the inconvenience of an unexpected shutdown, it
is still advisable to visually inspect the oil level regularly.
Single
viscosity
Multi-
viscosity
Dipstick
Oil drain bolt
Upper limit
Lower limit
Oil fill port

Other manuals for Kipor IG3000E

Related product manuals