Kirby Ultimate G Series User Manual

42
The Kirby Company
TURBO-SANDINGSET-UP(cont)
Select the correct grade of sandpaper needed for the
job. Use fine paper for a smooth finish and coarse
paper to clear rough surfaces or remove paint.
Slide the sheet into the front clamp and lock the clamp lever.
NOTE: Three grades of sandpaper come with the Sander.
Eachpieceisastandard1/3sheet.➤
Tightly wrap the paper around the bottom of the Turbo
Accessory and tuck the end into the rear clamp. Lock
the rear clamp. ➤
With the Turbo Accessory on a level surface, wrap the
Sander Dust Shroud around the Sander with the open-
ing to the rear and snap it closed. ➤
InserttheAttachmentHoseintotheendoftheTurbo
Accessory.
Grip the Sander at the front and rear and turn the
Ultimate G ON. Then press the ON button on the top of
the Sander.
While applying light pressure, move it over the surface slowly.
Allow the Sander to do the work. Don’t force it or lean heavily
on it. The tool works best at high speed. ❏
3
5
4
6
Optional Accessories
Optional Accessories
The Turbo Accessory System
™
(continued)
CAUTION: Always wear safety glasses when turbo sanding.
!

Kirby Ultimate G Series Specifications

General

Type	Upright
Power Source	Corded Electric
Filtration	HEPA
Weight	23 lbs
Bagless	No
Attachments	Crevice tool, upholstery tool, dusting brush
Features	LED headlight
Warranty	3 years