Kirby Ultimate G Series User Manual

50
The Kirby Company
WHEELWEAR/REPLACEMENT
Kirby
®
wheels are made with a pliable tread that is designed
to prevent carpet wear and prevent damage to non-carpeted
floors. After extended periods of use, the tread on the wheels
will wear out and the wheels will need to be replaced.
Check wheel tread occasionally to determine if the wheels
need to be replaced. The tread material is darker in color than
the plastic wheel itself. If any of the lighter plastic wheel is
showing through the tread, the wheels need to be replaced.
The wheels are not user-replaceable. Contact your nearest
authorized Kirby Service Center for prompt, courteous wheel
replacement. ❏
CORD REPLACEMENT
If the electrical cord connecting the Ultimate G to the outlet
becomescutorfrayedovertime,DONOTUSETHEUNIT.
Contact your authorized Kirby Service Center immediately
for replacement.
Avoid damage to your cord by being careful not to run over
it with your Ultimate G. Also, unplug your unit by grasping
the plug at the end of the cord rather than pulling on the cord
itself. ❏
Operating/MaintenanceTips
Operating/MaintenanceTips
Miscellaneous Parts Replacement

Kirby Ultimate G Series Specifications

General

Type	Upright
Power Source	Corded Electric
Filtration	HEPA
Weight	23 lbs
Bagless	No
Attachments	Crevice tool, upholstery tool, dusting brush
Features	LED headlight
Warranty	3 years