Why can't I hear other group members on my Kirisun Transceiver?
If you cannot communicate with other group members, it might be due to mismatched frequency channels. Ensure you select the same frequency channel as the others. Additionally, the CTCSS/DCS settings may be different; reset them using a PC. Also, consider that you might be out of the effective communication range.
What to do if my Kirisun PT3600 Transceiver cannot receive signals?
If your device isn't receiving signals, first, check the antenna connection and fasten it securely. If the issue persists, the HF amplifier might be broken and needs replacement. Also, the squelch level might be too high, preventing the squelch from opening. In this case, reset the squelch level using a PC.
How to fix a Kirisun PT3600 with no display after turning it on?
If your Kirisun Transceiver's display doesn't turn on after switching it on, the battery power might be insufficient; try recharging or changing the battery pack. Alternatively, the power switch could be broken and needs replacement. In some cases, the CPU or regulator tube might be faulty, requiring replacement of the IC.
Why is there no sound from my Kirisun PT3600 Transceiver when the receiving green light is on?
If the receiving green light is on but you hear no voice, the speaker may be broken and needs replacement. Another possibility is that the audio power amplifier is broken, requiring you to change the IC.
General| Frequency Range | 400-470 MHz |
|---|---|
| Output Power | 5W |
| Battery | Li-Ion |
| Battery Capacity | 2000 mAh |
| Water Resistance | IP54 |
| Channel Spacing | 12.5/25 kHz |
| Operating Voltage | 7.4 V |
| Operating Temperature | -20°C to +60°C |
| Channel Capacity | 16 channels |
To Next Page
