3.4 Residual risks
WARNING!
Danger of infection due to inadequate hygiene,
disinfection and sterilisation!
Contact with parts that have not been cleaned,
sterilised or disinfected poses the danger of infec-
tion.
– Comply with the applicable requirements for
personal hygiene, disinfection and sterilisation.
– Clean, disinfect and sterilise the unit before
filling it for the first time.
– Clean, disinfect and sterilise the unit in line with
this instruction manual during operation.
WARNING!
Danger due to escaping refrigerant!
The refrigerant used in the unit is explosive and
pressurised, and can cause serious injury if it
comes into contact with the eyes or skin.
– During transport and set-up, do not bend or
pierce the tubing and the evaporator.
– Do not damage the surface coat (scratching it
off, for example).
– Wear safety glasses and protective gloves
when handling the refrigerant circuit.
WARNING!
Danger due to unauthorised intervention in the
cooling circuit!
The cooling machine contains the natural refrig-
erant propane R290 / isobutane R600a. The refrig-
erant used in the unit is flammable and can cause
serious injury if it comes into contact with the eyes
or skin. Unauthorised intervention in the cooling
circuit poses a danger of injury!
– On site, only the entire cooling machine can be
replaced.
The cooling machine is a permanently technically
sealed system in line with EN 1127-1.
Infection of the user
Escaping refrigerant
Eco cooling machines
Safety
Residual risks
18.12.2018 Refrigerator/freezer BL series 23
To Next Page
Loading...
