10
INSTALLATION
INSTALLATION
Inside Mount: Attach the stationary rail bottom bracket. The bracket may be
attached to the sill or floor. It may also be attached to the jamb using the inside
mount adapter.
Be sure the stationary rail is flush against the jamb.
Floor or sill attachment: Attach the stationary rail bottom bracket using the
screw provided.
Jamb attachment: Use the inside mount adaptor to secure the stationary rail to
the side of the jamb.
— Slide the inside mount adaptor onto the stationary rail bottom bracket. Align
the screw hole of the adaptor to face the side jamb (or side wall).
— Secure with the provided screw through the inside mount adaptor and into the
side jamb (or side wall).
NOTE: If you ordered your shade with a cut-out, for baseboards or other obstructions,
you must use the inside mount adaptor.
CAUTION: Use drywall anchors when mounting into drywall.
Secure the stationary rail bracket using the provided small screw. Hold the bracket in place and screw through either of the two
holes on the bracket.
NOTE: Two #8 x
3
⁄
8
" pan head screws are provided; one is a spare.
Inside Mount
Adaptor
Stationary
Rail Bottom
Bracket
Stationary
Rail Bottom
Bracket
Floor or Sill Attachment Jamb Attachment
Jamb
Attachment
To Next Page
Loading...
