To Next PageTo Next PageWhy is my Kirsch Cellular Shade Collection Indoor Furnishing shade not responding to the Automation remote?
Make sure the shade has been added to a group, as it won't work with the remote until then. Verify that the correct group number is selected on the remote. Also, check that the batteries in the remote are correctly inserted, are fresh, and that the LEDs backlight fully when the STOP button is pressed.
General| Brand | Kirsch |
|---|---|
| Model | Cellular Shade Collection |
| Category | Indoor Furnishing |
| Language | English |
Illustrates and identifies all components of the cellular shade system for user familiarization.
Lists necessary tools and hardware required for shade installation and setup.
Details the different types of valances (aluminum and traditional) and their components.
Details installation bracket quantities, overview, window terminology, and mounting options.
Provides detailed instructions for mounting the shade outside the window opening.
Explains the procedure for installing the shade within a window opening or on a ceiling.
Guides on how to prepare and install the fabric stack into the headrail and rails.
Instructions for attaching the stationary rail bracket to the wall or floor.
Details how to properly set the cord tension for smooth shade operation.
Explains how to adjust the moving rail for proper vertical alignment.
Steps for installing the manual control button for automated operation.
Guides on connecting battery wands or the 18V DC power supply.
Verifies that the motor and power source are functioning correctly using the manual control button.
Details the functions and layout of the automation remote control.
Guides on joining shades to groups and performing basic open, close, and stop operations.
Instructions for recalibrating travel limits and resetting shade programming.
Explains how to operate the shade using both motorized and manual methods.
Guides on how to attach valance clips securely to the headrail.
Specific steps for installing aluminum valances, including corner end caps and locks.
Instructions for attaching traditional valances, including corner brackets and dovetail brackets.
Details the installation of a second valance for room divider configurations.
Provides solutions for common problems encountered during operation and installation.
Guides on how to safely remove the shade and perform various cleaning procedures.
Details U.S. FCC and Industry Canada radio frequency compliance and digital device notices.
Outlines what is covered and not covered under the 10-year limited warranty, and how to obtain service.
