KitchenAid KEBK171SSS - Page 41

4-17
7. To remove the oven thermal cutoff
(TCO):
Screws
TCO Wires
6. To remove the blower speed resistor:
Blower Speed
Resistor Wires
Screw
a) Disconnect the two gray wires from the
resistor terminals.
b) Remove the screw from the resistor
bracket and remove the resistor.
Blower Speed Resistor
b) Disconnect the two red wires from the
TCO terminals.
c) Remove the two mounting screws and
remove the TCO.
Top Cover
Screws (3 of 6)
a) Remove the six screws from the top
cover and remove the cover.
Oven Thermal Cutoff