NEVER support a load on the tip of the hook.
NEVER contact the load chain over an edge.
NEVER weld or cut a load suspended by a hoist.
NEVER use the hoist chain as a welding electrode.
NEVER operate a hoist if chain jumping or excessive noise occurs.
NEVER use the capsized load chain.
NEVER use the friction clutch or limit switch regularly, which may cause several damage to the
hoist and cause serious injury.
NEVER pull the push button cord.
3.2.3 After operation
NEVER leave a suspended load unattended.
3.2.4 Maintenance
ALWAYS let the qualified service personnel inspect the hoist periodically (Refer to 7.3.3).
ALWAYS oil the load chain (Refer to 7.2).
NEVER splice. add and weld a load chain for extension.
NEVER touch live electrical parts.
NEVER adjust the friction clutch.
3.2.5 Others
ALWAYS consult the manufacturer or your dealer if you plan to use a hoist in an excessively
corrosive environment (salt water, sea air and/or acid, explosive environment or other
corrosive compounds, etc.).
− 3 −
To Next Page
Loading...
Need help?
General
