KITO ER2M User Manual

89
Item Check method Criteria When failed
Deformation
and Abrasion
• Check the deformation
and abrasion visually and
measure them with vernier
caliper.
I-beam H-beam
B B
t
t
• Tohavenodeformationofbeamangesuch
as twist and shear drop
• To have no exceeding abrasion of rail surface
• Service limit of B: up to 95 % of the dimension
at purchasing
• Service limit of c: up to 90 % of the dimension
at purchasing
Replace or repair the
Travel Rail.
Rail Mounting
Bolt
• Check visually. • To have no loosened bolt or fall-off Tighten the bolts
securely.
Stopper
• Check visually.
Stopper Stopper
• The stoppers must be mounted at the both
ends of the Travel Rail securely.
Tighten the Stoppers.
Item Check method Criteria When failed
Operational
Check
• Perform the daily inspection
items with capacity. (Refer
to Daily inspection Items.
(P24))
• Be sure to perform
the capacity test after
completion of the no-load
test.
Performing the capacity test without
prior no-load test may result in death
or serious injury.
Mandatory
DANGER
Disassemble the
electric chain hoist
to check whether it is
assembled correctly
and has no abnormal
part.
• Referto“DailyInspectionItems”.(P24)
Abnormal
Noise
• To make the electric chain
hoist travel with a capacity
• To have no irrotating sound Disassemble the electric
chain hoist to check whether
it is assembled correctly and
has no abnormal part.
■
Function and Performance
● Perform the following inspections with capacity.
Periodic Inspection
2
Manual Trolley (TSG/TSP) Periodic Inspection
• After completion of the inspection of each part, perform the operational check for correct operation.
Neglecting to perform the operational check may result in death or serious injury.
Mandatory
DANGER

KITO ER2M Specifications

General

Brand	KITO
Model	ER2M
Category	Chain Hoists
Language	English