Kiturami WORLD PLUS-13D - First Ignition Operation

Date : …….………………………………
Installer : ……………………………………
3-2 FIRST IGNITION OPERATION
15. Check the ionisation
current
Compleat……………………
……
.
12. Check the working in
DHW mode
Compleat……………………
…….
9. Set the heating power.
See section
Compleat……………………
…….
6. Fill the installation. See
section
Compleat……………………
…….
3. Check the gas tightness
Compleat……………………
…….
2. Check the type of gas
and
change the gas if necessary
Compleat……………………
5. Check the exhaust
fume. See section……
Compleat……………………
…….
8. Spin the pump.
Compleat……………………
…….
11. Balance the central
heating circuit
Compleat ……………….……
…
14. Make a combustion
rate
with once pressing on
RESET button during 5 sec
Compleat ……………….……
1. Check the electrical supply.
Compleat……………………
…….
4. Measure the gas inlet
Compleat……………………
…….
7. Check the hydraulic
tightness
Compleat……………………
…….
10. Adapt the requlation at
the heating instation
Compleat……………………
…….
13. Adjust DHW flow rate
on the boiler(if necessary)
Compleat……………………
…….
16. Explain to the end user
the working of the boiler
Compleat……………………
…….
21페이지