What to do if KKT Compact-Line cBoxX 160 pump 1 motor protection has triggered?
If the pump 1 motor protection has triggered, it could be due to the motor current being outside the permitted range or the pump being blocked. Check pump 1 for a short-circuit in the supply cable, an internal short-circuit in the motor windings, or if the motor is blocked. Also, verify if the load contactor is working correctly.
What to do if the KKT Compact-Line cBoxX 160 Chiller pump 1 flow is insufficient?
If pump 1 flow is insufficient, it may be due to high pressure loss. Check the external piping for closed gate valves, a blocked water filter, or system leaks.
What to do if AI high pressure sensor breaks in KKT Chiller?
If there is a sensor break with the AI high pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI low pressure sensor breaks in KKT Compact-Line cBoxX 160?
If there is a sensor break with the AI low pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI inlet temperature sensor breaks in KKT Compact-Line cBoxX 160?
If there is a sensor break with the AI inlet temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI outlet temperature sensor breaks in KKT Chiller?
If there is a sensor break with the AI outlet temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI tank pressure sensor breaks in KKT Chiller?
If there is a sensor break with the AI tank pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI water inlet pressure sensor breaks in KKT Chiller?
If there is a sensor break with the AI water inlet pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI ambient temperature sensor breaks in KKT Chiller?
If there is a sensor break with the AI ambient temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI suction vapour temperature sensor breaks in KKT Compact-Line cBoxX 160 Chiller?
If there is a sensor break with the AI suction vapour temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
Provides key specifications and performance metrics for different models.
Explains the role and working principle of the compressor in the refrigeration cycle.
Describes the central unit for system control and data processing.
Provides general safety context and mentions the high-pressure circuit.
Details specific hazard warnings and symbols applicable to the machine.
Discusses residual energy sources and potential hazards after shutdown.
Covers various safety mechanisms like high-pressure limiters and monitoring.
Specifies required PPE for maintenance and servicing activities.
Lists residual risks related to electrical, mechanical, chemical, and other hazards.
Details hazards and first-aid for dangerous substances like R410A and oil.
Outlines potential dangerous situations arising from improper use.
Provides guidance on actions to take during emergency situations.
Details methods and precautions for transporting the chiller unit.
Covers general site requirements, room volume, and environmental factors.
Covers system designer responsibilities for hydraulic connections and pressure.
Details measures to prevent freezing in the cold water circuit.
Explains the necessity and procedure for flushing the circuit before filling.
Provides instructions for filling the chiller system with operating liquids.
Outlines requirements and precautions for electrical connections.
Provides a comprehensive checklist to verify installation completion before commissioning.
Describes the initial power-on procedure and the start screen.
Explains the different operating modes (OFF, AUTO, ON).
Details the function and wiring of the external release control.
Covers the display elements, buttons, and navigation of the control panel.
Provides a detailed explanation of the controller's functions and logic.
Explains the importance and purpose of regular maintenance.
Guides users to troubleshooting resources for fault correction.
To Next Page
General