What to do if KKT Compact-Line cBoxX 200 pump 1 motor protection has triggered?
If the pump 1 motor protection has triggered, it could be due to the motor current being outside the permitted range or the pump being blocked. Check pump 1 for a short-circuit in the supply cable, an internal short-circuit in the motor windings, or if the motor is blocked. Also, verify if the load contactor is working correctly.
What to do if the KKT Compact-Line cBoxX 200 Chiller pump 1 flow is insufficient?
If pump 1 flow is insufficient, it may be due to high pressure loss. Check the external piping for closed gate valves, a blocked water filter, or system leaks.
What to do if AI high pressure sensor breaks in KKT Chiller?
If there is a sensor break with the AI high pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI low pressure sensor breaks in KKT Chiller?
If there is a sensor break with the AI low pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI inlet temperature sensor breaks in KKT Chiller?
If there is a sensor break with the AI inlet temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI outlet temperature sensor breaks in KKT Chiller?
If there is a sensor break with the AI outlet temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI tank pressure sensor breaks in KKT Compact-Line cBoxX 200 Chiller?
If there is a sensor break with the AI tank pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI water inlet pressure sensor breaks in KKT Compact-Line cBoxX 200 Chiller?
If there is a sensor break with the AI water inlet pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI ambient temperature sensor breaks in KKT Compact-Line cBoxX 200 Chiller?
If there is a sensor break with the AI ambient temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI suction vapour temperature sensor breaks in KKT Compact-Line cBoxX 200?
If there is a sensor break with the AI suction vapour temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
Details the chiller's purpose, safety class, and operator responsibilities.
Provides specifications like capacity, dimensions, voltage, and weight for various models.
Explains the compressor's role in pressure generation and its operational principle.
Describes the evaporator's function as a heat exchanger for cold water to refrigerant transfer.
Explains the condenser's heat transfer role and factors affecting its performance.
Details the electronic expansion valve's control over refrigerant flow and pressure.
Explains the control unit's role in system programming and component control.
Explains the pump's function in ensuring cold water circulation.
Describes the fan's role in cooling air circulation and safety features.
Explains the cold water circulation process and its configurations.
Provides general safety information about the chiller's high-pressure circuit.
Instructs users to keep warning labels clean and replace them if damaged.
Discusses residual energy hazards like fan rotation, hot surfaces, and stored electrical voltage.
Explains the high-pressure limiter's role in limiting pressure and switching off compressors.
Describes monitoring that reduces compressor output before a safety limit is reached.
Explains monitoring to prevent freezing by reducing compressor operation.
Details monitoring of water flow to prevent freezing and ensure proper operation.
Lists required PPE for servicing tasks involving opening the machine.
Warns about toxic products from refrigerant decomposition and fire hazards.
Provides first aid, fire-fighting, and release measures for R410A.
Details first aid, fire-fighting, and release measures for POE 160SZ oil.
Lists dangerous situations arising from foreseeable misuse of the chiller.
Stresses qualified personnel for electrical work and completing hydraulics before power-on.
A checklist to verify all installation tasks are completed before commissioning.
Explains cold water temperature control using sensors and proportional control.
Details compressor control, selection, and fault handling.
To Next Page
General