What to do if KKT Compact-Line cBoxX 180 Chiller pump 1 motor protection has triggered?
If the pump 1 motor protection has triggered, it could be due to the motor current being outside the permitted range or the pump being blocked. Check pump 1 for a short-circuit in the supply cable, an internal short-circuit in the motor windings, or if the motor is blocked. Also, verify if the load contactor is working correctly.
What to do if the KKT Chiller pump 1 flow is insufficient?
If pump 1 flow is insufficient, it may be due to high pressure loss. Check the external piping for closed gate valves, a blocked water filter, or system leaks.
What to do if AI high pressure sensor breaks in KKT Compact-Line cBoxX 180 Chiller?
If there is a sensor break with the AI high pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI low pressure sensor breaks in KKT Compact-Line cBoxX 180 Chiller?
If there is a sensor break with the AI low pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI inlet temperature sensor breaks in KKT Compact-Line cBoxX 180 Chiller?
If there is a sensor break with the AI inlet temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI outlet temperature sensor breaks in KKT Compact-Line cBoxX 180?
If there is a sensor break with the AI outlet temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI tank pressure sensor breaks in KKT Compact-Line cBoxX 180 Chiller?
If there is a sensor break with the AI tank pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI water inlet pressure sensor breaks in KKT Chiller?
If there is a sensor break with the AI water inlet pressure in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI ambient temperature sensor breaks in KKT Chiller?
If there is a sensor break with the AI ambient temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
What to do if AI suction vapour temperature sensor breaks in KKT Compact-Line cBoxX 180 Chiller?
If there is a sensor break with the AI suction vapour temperature in your KKT Chiller, you should test the supply cable, connector, and sensor.
Provides detailed technical specifications and performance data of the chiller models.
Details the various warning labels applied to the machine and their meaning.
Explains residual energy situations that can pose a hazard even when the machine is off.
Covers safety devices like pressure limiters and monitoring systems.
Details the high-pressure limiter (PZH) and its function in safety.
Explains the high-pressure monitoring system that reduces compressor output.
Describes the low-pressure monitoring to prevent freezing risks.
Details the flow monitoring system to prevent freezing in the evaporator.
Outlines PPE needed for servicing and maintenance tasks.
Identifies residual risks associated with electrical, mechanical, and chemical hazards.
Addresses residual electrical risks during operation and maintenance.
Details residual mechanical risks, including refrigerant leaks.
Covers chemical hazards, including refrigerant decomposition products.
Provides information on dangerous substances like Refrigerant R410A and oil.
Details first aid, fire-fighting, and release measures for Refrigerant R410A.
Provides safety information for Oil POE 160SZ, including first aid and handling.
Outlines dangerous situations that can arise from foreseeable misuse of the chiller.
Provides guidance for emergency situations involving the chiller.
Details site requirements for installing the chiller, including general information.
Covers general aspects of choosing an installation site for the chiller.
Specifies the minimum room volume required for indoor chiller installation.
Covers the design considerations for hydraulic connections and pressure.
Details measures to protect the chiller from freezing under various conditions.
Covers the electrical connection, testing, and commissioning requirements.
Lists essential checks to perform before commissioning the chiller.
Details the display elements and controls of the chiller's user interface.
Describes how to view and acknowledge alarms in the alarm menu.
Provides a description of the chiller's controller functions and logic.
Details the electronic level monitoring system and its states.
Describes how the chiller controls cold water flow temperature.
Details the logic and sequence for controlling the compressors.
Covers the monitoring of cold water feed temperature limits.
Explains the group fault alarm and its signalling.
Covers the importance and purpose of regular maintenance for reliable operation.
Directs users to troubleshooting and fault correction resources.
Recommends using original spare parts for performance and reliability.
To Next Page
General