SaunaP
UR
PAGE 10
5070178/07.02
5. Operation
Button: Description:
A Light button
B I/0 button
C Left/Right buttons
D Up/Down buttons
E OK button
Sauna program: Temperature:
1 Individual program
280°C
390°C
4
95 °C
Prerequisite/note for the operation described below:
d The control unit is in standby mode. The time appears in the display.
. The selected program starts automatically three seconds after the last press of a button.
5.4. Starting sauna operation
RISK OF FIRE!
Before operating the control unit, always make sure that there are no combustible
objects on or near the sauna heater.
1. Press the B button.
. The operating mode selected most recently and its settings appear in the display.
' If other values are to be used for the selected program - see Chapter 6.
Or:
2. Select the desired sauna program using the up/down
buttons.
. Each further press of the button displays the next sauna program.
3. Start sauna operation using the
button.
. At the end of the heating phase the bathing visitor
symbol appears in the display. The sauna is
ready for bathing.
To Next Page
Loading...