Klafs 16029 - Preselection Mode; Setting the Fan (Optional)

SaunaP UR
PAGE 15
5070178/07.02
6. Individual settings
Button: Description:
A Light button
B I/0 button
C Left/Right buttons
D Up/Down buttons
E OK button
6.4. Preselection mode
RISK OF FIRE!
Before operating the control unit, always make sure that there are no combustible
objects on or near the sauna heater.
1. To select the menu, use the left/right buttons .
2. Use the up/down
buttons to make the preselection.
3. Confirm the set time using the
button.
4. The program is started automatically, taking the heating-up period into account. The cabin will be
ready for bathing at the set time.
Preselection mode can be ended by selecting the ”end” operating mode.
The control unit starts prior to the set time!
6.5. Setting the fan (optional)
1. To select the menu, use the left/right buttons .
2. To change the
bar display, use the up/down buttons .
Display: No bar = fan off. Display: 10 bars = maximum fan speed.
3. Confirm the set value using the
button.
After confirmation the control unit operates with the new fan setting.