EasyManua.ls Logo

Klafs 16029 - Brief Description of the Saunap; UR Control Unit 16029

Klafs 16029
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SaunaP
UR
PAGE 5
5070178/07.02
1. Brief description of the SaunaP
UR
Control Unit 16029
The Klafs SaunaP
UR
control unit enables you to operate your sauna conveniently. Three permanently
programmed standard programs are available for each form of bathing (Sauna).
Modifications of the settings in any of the standard programs are stored in an individual program.
The following operating values can be changed within the setting range before and during operation
via the control panel:
d temperature
d starting and operating time.
LCD display
Master switch Control panel
Forms of bathing:
Sauna
with temperatures between 85 - 100 °C and a low relative humidity.
SaunaP
UR
the new development from Klafs brings back the tradition of Finnish stone sweat baths.
Thanks to approx. 100 kg of olivine stones in the sauna heater, sauna bathing is even more
beneficial, intensive raponsing is possible at the same time. SaunaP
UR
creates the feeling of earthy
warmth in a Finnish sauna.
The sauna must be pre-heated to 70 - 85 °C a long time. Afterward, the heater is switched off by
the SaunaP
UR
function at the beginning of bathing.
The slowly falling temperature can be compensated by frequent raponsing. The new form of
bathing makes sauna bathing possible without clicking sounds and with reduced electromagnetic
radiation.
Warm Air Bath
with particularly mild climate, temperatures between 45 - 60 °C and a relative humidity up to
approx. 20 %.
The desired effect of each form of bathing in your Klafs sauna is to help improve your health
and prevent future health problems.
Therefore:
Do not overdo it! This applies to the temperature and bathing duration. Do not
act simply according to the stated bathing times, but according to your own condition.
Leave the cabin straight away if you are not feeling well.
The Klafs sauna consists of the following components:
d a microprocessor control with integrated power circuit
d two temperature sensors
d Climate manager, remote control, internal display with SaunaP
UR
button (optional features).
Specifications of the SaunaP
UR
Control Unit 16029
Control unit type 16029: 400 V 3 N, 50-60 Hz, max. 9 kW.
Room conditions: Temperature 0 ºC to 40 ºC, max. humidity 80% RH.

Table of Contents