Klafs 16029 - Setting the Temperature; Setting the Bathing Duration; Selecting the Program; Individual Settings

SaunaP UR
PAGE 14
5070178/07.02
6. Individual settings
Button: Description:
A Light button
B I/0 button
C Left/Right buttons
D Up/Down buttons
E OK button
Sauna program: Temperature:
1 Individual program
280°C
390°C
4
95 °C
6.1. Selecting the program
RISK OF FIRE!
Before operating the control unit, always make sure that there are no combustible
objects on or near the sauna heater.
1. To select the menu, use the left/right buttons .
2. Use the up/down
buttons to select the program.
The value that can be changed flashes.
3. Confirm the selection using the
button.
The flashing value changes to continuous display.
The bathing program starts.
6.2. Setting the temperature
1. To select the menu, use the left/right buttons .
The value that can be changed flashes.
2. Use the up/down buttons
to change the flashing value.
3. Confirm the set value using the
button.
If the value deviates from a standard program, the value is automatically stored as an individual
program.
6.3. Setting the bathing duration
1. To select the menu, use the left/right buttons .
The value that can be changed flashes.
2. Use the up/down buttons
to change the flashing value.
The standard bathing duration is 4 hours.
3. Confirm the set value using the
button.
The flashing value changes to continuous display.
The remaining bathing time appears in the display together with the (hour-glass) symbol
.