Klein Tools CL200 User Manual

ENGLISH
H. Backlight / Worklight
• Hold button down to enable worklight and backlight.
• On release, lights will turn off automatically after 5 to 15 seconds.
• Worklight only operates during AC current measurement.
• Using lights drains the battery significantly.
CL200
1
5
2
4
FUNCTION INSTRUCTIONS
AUTO
A
AC
CL200
1
B
C
3
F
A
E
D
G
H
H
A. Use CAT III rated leads or higher.
Do not attempt to measure more than 600V or
any current on lead input.
B. Keep hands below line when measuring high current levels.
C. Select Functionality Button
• Switch between AC and DC.
• Switch between
Ω, , , and .
D. Data Hold
• Press to hold the current input on the display.
• Press again to return to live reading.
E. Auto / Manual Range
• Press repeatedly to cycle through manual ranges.
• Hold for 2 seconds to return to auto ranging mode.
•
AUTO
is displayed on LCD only during auto ranging mode.
F. G. Battery Replacement
• When
indicator is displayed on the LCD,
batteries must be replaced.
• Remove the back screw and replace 3 x AAA batteries.
On Back
1. AC Current:
<
600A
Features:
HOLD RANGE WORKLIGHT
• Center wire in guides for best accuracy.
• Opposing currents cancel (use line-splitter when necessary).
2. AC / DC Voltage:
<
600V
Features:
HOLD RANGE
• Select AC or DC voltage source.
3. Frequency (Hz) / Duty Cycle
Features:
HOLD
PRESS
AUTO
A
AC
AUTO
A
AC
PRESS
Duty
AUTO
A
AC
Auto Power-Off
• Device will power off after 30 minutes non-use.
• Turn the dial or press a button to wake.
• Press the
HOLD
button while turning on to disable
Auto Power-Off feature.
FEATURE DETAILS

Klein Tools CL200 Specifications

General

Brand	Klein Tools
Model	CL200
Category	Multimeter
Language	English