Need help?Do you have a question about the Klein Tools 69149P and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Model | 69149P |
| Brand | Klein Tools |
| Display | LCD |
| Display Digits | 4000 |
| Continuity | Yes |
| Diode Test | Yes |
| Audible Continuity | Yes |
| Safety Rating | CAT III 600V |
| Auto Power Off | Yes |
| Low Battery Indicator | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| AC Voltage | 600V |
| DC Voltage | 600V |
| AC Current | 10A |
| DC Current | 10A |
| Capacitance Range | 100μF |
Specifies the maximum operational altitude for the multimeter.
Indicates the non-condensing humidity range for operation.
Defines the acceptable temperature range for using the meter.
Specifies the temperature range for storing the multimeter.
The temperature range at which stated accuracy values are valid.
Correction factor for accuracy outside the standard temperature range.
Physical size and mass of the multimeter.
Information on calibration period and adherence to safety standards.
Indicates the meter's resistance to drops from a specified height.
Details on safety rating (CAT III) and electromagnetic compatibility.
Accuracy, range, and resolution for DC voltage measurements.
Accuracy, range, and resolution for AC voltage measurements.
Accuracy, range, and resolution for DC current measurements.
Accuracy, range, and resolution for resistance measurements.
Specifications for battery testing and diode testing functions.
Details on continuity detection and meter display capabilities.
Information on sampling rate and overload indication.
Notes on polarity indication and other operational features.
Essential safety instructions to prevent injury or death during use.
Proper procedure for connecting test leads to the meter and circuit.
Guidelines for safe testing in CAT III/IV and CAT II measurement locations.
Step-by-step guide for measuring AC voltage up to 600V.
Step-by-step guide for measuring DC voltage up to 600V.
Procedure for measuring DC current in different ranges.
Instructions for performing resistance measurements.
How to conduct a continuity test with audible feedback.
Procedure for testing the forward and reverse bias of diodes.
Method for testing the condition of 1.5V and 9V batteries.
How to use the data hold button to freeze readings.
Instructions for replacing the multimeter's batteries.
Guide for safely replacing blown fuses in the multimeter.
Proper methods for cleaning and storing the multimeter.
Guidelines for environmentally responsible disposal of the device.
To Next Page