2
GENERAL SPECIFICATIONS
Klein Tools MM300 is a manual ranging multimeter that measures
AC/DC voltage, DC current, and resistance. It can also test batteries,
diodes, and continuity.
• Operating Altitude: 6562 ft. (2000m)
•
Relative Humidity: <80% non-condensing
• Operating Temp: 32°F to 104°F (0°F to 40°C)
•
Storage Temp: 14°C to 140°F (-10°C to 60°C)
•
Accuracy: Values stated at 65° to 83°F (18° to 28°C)
•
Temp Coef cient: 0.1 x (Quoted Accuracy) per °
C above
28
°C or below 18°
C, corrections are required when ambient
working temp is outside of Accuracy T
emp range
•
Dimensions: 6.04" x 3.07" x 1.78" (153.4 x 78.0 x 45.2 mm)
•
Weight: 8.1 oz. (230 g)
•
Calibration: Accurate for one year
•
Standards: Conforms to: UL STD 61010-1, 61010-2-030,
61010-2-033.
Certified to: CSA STD C22.2 # 61010-1,
61010-2-030, 61010-2-033.
IEC EN 61010-1, 61010-2-030,
61010-2-033, 61326-1.
• Pollution degree: 2
•
Accuracy: ± (% of reading + # of least significant digits)
• Drop Protection: 3.3 ft. (1m)
•
Safety Rating: CAT III 600V, Class 2, Double insulation
CAT III: Measurement category III is applicable to test and
measuring circuits connected to the distribution part of the
building’s low-voltage MAINS installation.
• Electromagnetic Environment: IEC EN 61326-1. This
equipment meets requirements for use in basic and controlled
electromagnetic environments like residential properties,
business premises, and light-industrial locations.
Specifications subject to change.
ENGLISH
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
