Klein Tools CL200 User Manual

Instruction
Manual
Instruction
Manual
ENGLISH
www.kleintools.com
F o r P r o f e s s i o n a l s . . . S i n c e 1 8 5 7
®
ENGLISH
CL200
AUTO
A
AC
CL200
• 3-3/4 DIGIT
3999 COUNT LCD
• AUTO / MANUAL
RANGE
• DATA HOLD
• BACKLIGHT
• WORKLIGHT
CL200
Instruction Manual
GENERAL SPECIFICATIONS
The Klein Tools CL200 is a multi-featured clamp meter. It measures
AC / DC voltage, AC current, resistance, capacitance, frequency, duty cycle,
and temperature. It can also test diodes and continuity.
• Operating Altitude: 2000 meters
• Relative Humidity: 75% max
• Operating Temperature: 0°C / 32°F to 40°C / 104°F
• Storage Temperature: -10°C / 14°F to 50°C / 122°F
• Accuracy Temperature: 18°C / 64°F to 28°C / 82°F
• Temperature Coefficient: 0.1*(specified accuracy) / °C
• Sampling Frequency: 3 samples per second
• Dimensions: 8.2" x 3.0" x 1.4"
• Weight: 10.0 oz.
• Calibration: Accurate for one year
• CAT Rating: CAT III 600V
• Accuracy: ± (% of reading + # of least significant digits)
WARNINGS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring
a known voltage or current.
• Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
• Do not use the meter during electrical storms, or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fingers away from
the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes
are connected.
• Use caution when working with voltages above 60V DC,
or 25V AC RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock,
replace batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out
power before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
SYMBOLS
~
AC Alternating Current Warning or Caution
DC Direct Current Dangerous levels
DC/AC Voltage or Current Double Insulated Class II
Ground
Safe for disconnect
from live conductors
AC Source

Klein Tools CL200 Specifications

General

Brand	Klein Tools
Model	CL200
Category	Multimeter
Language	English

Summary

General Specifications

Warnings and Safety Precautions

Symbols Used

Feature Details

Select Functionality Button

Switch between AC and DC, and Ω, continuity, diode, capacitance.

Data Hold Function

Press to hold current input on display; press again to return to live reading.

Auto / Manual Range Selection

Cycle through manual ranges; hold for 2 seconds to return to auto ranging.

Battery Replacement Guide

Replace batteries when low battery indicator appears.

Function Instructions

AC Current Measurement

Center wire in guides for accuracy; opposing currents cancel.

AC/DC Voltage Measurement

Select AC or DC voltage source.

Frequency and Duty Cycle Measurement

Measure frequency and duty cycle.

Electrical Specifications

DC Voltage Measurement Specs

Details ranges, resolution, and accuracy for DC voltage.

AC Voltage Measurement Specs

Details ranges, resolution, and accuracy for AC voltage.

AC Current Measurement Specs

Details ranges, resolution, and accuracy for AC current.

Resistance Measurement Specs

Details ranges, resolution, and accuracy for resistance.

Additional Measurement Specifications

Capacitance Measurement

Details ranges, resolution, and accuracy for capacitance.

Frequency Measurement

Details ranges, resolution, and accuracy for frequency.

Duty Cycle Measurement

Details range, resolution, and accuracy for duty cycle.

Temperature Measurement

Details range, resolution, and accuracy for temperature.

Diode Test Specifications

Details overload protection, resolution, and open circuit voltage.

Continuity Test Specifications

Details overload protection, resolution, and open circuit voltage.

Product Information

Warranty Details

Two-year warranty against defects in materials and workmanship.

Cleaning Instructions

Clean instrument with a damp cloth; do not use abrasive cleaners.

Storage Recommendations

Remove batteries for prolonged storage; avoid high temperature/humidity.

Disposal and Recycling

Symbol indicates separate collection and correct disposal of equipment.

Customer Service Information

Contact details for Klein Tools customer service and website.