KLIM 10U - Group and Universal Intercom

10U
28
11 UNIVERSAL INTERCOM
You can have an intercom conversation with non-Sena Bluetooth
headsets using the Universal Intercom function. Non-Sena Bluetooth
headsets can be connected to the Sena Bluetooth headset if they
support the Bluetooth Hands-Free Prole (HFP). The working distance
may differ depending on the performance of Bluetooth headset that it
is connected to. In general, it is shorter than normal intercom distance
since it uses the Bluetooth Hands-Free Prole. The Universal Intercom
affects both the phone call connection and the multipoint connection
(mostly used for GPS connections for riders). You cannot use a
multipoint connection device while you are using the Universal
Intercom in case as below.
10 GROUP INTERCOM
Group Intercom allows you to instantly create a multi-way conference
intercom with three other most recently paired headsets.
1. Go through intercom pairing with up to three headsets you want to
have Group Intercom with.
2. Tap the (+) Button and (-) Button simultaneously to begin Group
Intercom. The LED will ash blue and red simultaneously and you
will hear a voice prompt, “Group intercom”.
3. To terminate Group Intercom, press the Center Button for
1 second during Group Intercom. You will hear a voice prompt,
“Group intercom terminated”.
Note:
Group Intercom supports 10U, 10C, 10R, 10S and 20S only. Other headsets
will be excluded from Group Intercom.