36
PELLET-BURNING BOILER ECOMPACT 150-190-250-290
EN - Rev 1.1
After removing the turbulator inspection front plate (Figure 8), vacuum the deposits on the inside using a suitable ash
vacuum device (Figure 9). When finished, replace the plate and front guard.
To ensure correct operation, it is necessary to remove the sawdust deposited on the base of the tank (Figure 10) at least
once every 30 days. The pellet tank must be emptied at the end of every season.
Cleaning the ceramic glass
Always clean the glass when the appliance is off and has cooled down completely. Use a damp cloth or a detergent
specifically formulated for ceramic glass. Do not use abrasive sponges. Do not clean the glass if still warm; changes in
temperature can lead to breakage.
To Next Page
Loading...
