KMC Controls BAC-19 FlexStat Series - Page 2

BAC-19xxxx FlexStat Application Guide 2 AG200824A
Conguration Issues ...............................18
Objects Are Missing ...............................18
(Unknown) Password Is Required ..............18
Software Not Compatible with the FlexStat .19
Input, Sensor, and Value Issues ...................19
CO
2
Level Value Is Frozen or Is 0 ...............19
CO
2
and DCV Sequences Are Not Working ..19
CO
2
Level Is “Too High” ...........................19
Input Values Outside Expected Range ........19
Humidication/Dehumidication Issues .....19
Motion/Occupancy Sensor Does Not Work ..20
Temperature Reading Is Incorrect .............20
Temperature Setpoint Is Not Maintained ....20
Operation Issues .......................................21
Schedules Do Not Operate Properly ...........21
Time and/or Date Are Not Correct .............21
Trends Do Not Work ................................21
Other Issues ..........................................21
Output, Fan, and Relay Issues .....................21
Analog Output Does Not Work ..................21
Damper/Economizer Does Not Work ..........22
Fan Does Not Run ...................................22
Relay (External) Does Not Work ................22
Relay (Internal) Does Not Work .................22
Updating Firmware Issues ..........................22
Finding and Selection Issues ....................22
Malfunction after Firmware Update ...........22
Power Issues ............................................23
Protocol Issues .........................................23
Wiring Issues ...........................................23
Appendix: UTC Offset Time Zones ..................25
Important Notices ........................................26
Handling Precautions ...................................26
Support ......................................................26
Index .........................................................27