KMC Controls BAC-19 FlexStat Series - User Manual

BAC-19xxxx FlexStat Application Guide 1 AG200824A
CONTENTS
Settings ...................................................... 3
Initial Conguration .................................... 3
Accessing Settings .................................... 4
Conguration Navigation/Selection ............... 4
Advanced (Menu Options) ........................... 4
Communications (Menu Options) .................. 5
Schedule (Menu Options) ............................ 5
Set Clock (Menu Options) ............................ 5
Setpoints (Menu Options) ............................ 5
System (Menu Options) ............................... 6
Trends and Alarms ..................................... 7
Passwords ................................................... 7
Communication Options ................................. 7
Conguration via Display Menus ................... 7
Ethernet/IP Conguration via Software .......... 7
MS/TP Conguration via Software ............... 8
Display Customization ................................... 9
CO
2
Sensors and DCV Operation .....................11
Introduction .............................................11
Basic DCV Mode .......................................12
Standard DCV Mode ..................................12
Wiring Considerations ..................................13
General Wiring Considerations ....................13
Ethernet Network Wiring Considerations .......14
MS/TP Network Wiring Considerations .........14
Restarting the FlexStat .................................15
Types of Restart .......................................15
Warm and Cold Starts ................................15
Troubleshooting ..........................................16
Alarm Issues ............................................16
Alarm, (False) Fan Status Fail ...................16
Alarms, Other ........................................16
Back-Up Issues ........................................16
Communication Issues ...............................16
(MS/TP) Data Port Communication Issues .. 16
Ethernet/IP Network Communication Issues 16
MS/TP Network Communication Issues .....16
Cover, Display, and Reset Issues ..................17
Cover Binds on Backplate ........................17
Display Is Blank, Erratic, or Frozen ............17
Display Keeps Resetting ..........................17
Conguration and Programming Issues ........18
Application Is Not Correct ........................18
Control Basic Programs Do Not Work .........18
BAC-19xxxx FlexStat
Application Guide

KMC Controls BAC-19 FlexStat Series Specifications