OPE-MVUSER-0473-C The Knox Company ▪ MedVault
®
▪ 15
Step #22 Attach Serial Number Label
• The serial number of the MedVault will change when the MedVault 2.5 circuit
board is installed. The new serial number is on the MedVault label that is
taped to the circuit board packaging.
• Once the circuit board is installed, remove the old label and attach the new
serial number label to the front of the MedVault.
Step #23 Optional Step to transform MedVault 2.0 Wi-Fi-Ready
to Wi-Fi Standard
If the current MedVault 2.0 has an antenna, this step is not necessary. Wi-Fi-
Ready MedVaults 2.0 do not have an antenna and in order for the MedVault 2.5
circuit board to function properly, an antenna must be installed. Antennas are not
included in the retrofit kit and must be purchased separately.
• Locate antenna connection on MedVault
• Tighten antenna connection
To Next Page
Loading...
Need help?
General
