Name: Knox MedVault 2.5 Mini
Brand: Knox
Rating: 5 (1 reviews)

To Next Page

To Previous Page

OPE-MVUSER-0473-C The Knox Company ▪ MedVault

▪ 1

Contents

MedVault 2.5 Board Installation Instructions ......................................................... 3

The Knox MedVault 2.5 circuit board includes the following updates: ................. 3

The tools and materials needed for the installation includes the following items:

........................................................................................................................... 3

MedVault Retrofit Kit 91158 and 91160 Include the following: ........................... 4

Safety precautions: ............................................................................................. 4

ESD Strap instructions………………………………………………………………………………..4

Serialized Labels ……………………………………………………………………………………. 4

Circuit Board Removal ........................................................................................ 6

Step #1 is Opening the MedVault .................................................................... 6

Step #2 Disconnect power and coax connection from back panel .................... 6

Step #3 Remove the tech key cover ................................................................ 6

Step #4 Unlock back cover .............................................................................. 7

Step #5 Remove the back plate ....................................................................... 7

Step #6 Unplug power to board and remove Wi-Fi board ................................ 7

Step # 7 Disconnect Lead wires ....................................................................... 8

Step #8 Remove tape from board and unplug connections .............................. 8

Step #9 Remove screws from circuit board ..................................................... 9

Step #10 Unplug wiring on top of board .......................................................... 9

Step #11 Snip the Cable Tie........................................................................... 10

Installing Circuit Board ..................................................................................... 11

Step #12 Connect board ................................................................................ 11

Step #13 Add Kapton tape to Connectors ...................................................... 12

Step #14 Fasten New board .......................................................................... 12

Step #15 Connect Wires to terminal block ..................................................... 13

Step #16 Secure Reset Switch wire ............................................................... 13

Step #17 Move Antenna cable fasten back plate.......................................... 14

Step #18 Tech Lock back in ......................................................................... 14

Step #19 Tech Lock cover .............................................................................. 14

Step #20 Reconnect power and fasten back plate ......................................... 14

Step #21 Initial Set Up .................................................................................. 14

Step #22 Attach serial number label …………………………………………………… 15

Knox MedVault 2.5 Mini User Manual

Questions and Answers: