Kodak Astro Zoom PIXPRO AZ252

20
Resetting Date/Time
After you set your Date/Time for the first time, follow
the instructions below to reset date and time.
1. Press the
button, press the up/down arrow
buttons to select , and press the button to
enter the menu.
2. Press the up/down arrow buttons to select
, and
press the button or right arrow button to enter the
menu.
3. Press the up/down arrow buttons to select 澨Date &
Time澩and press the
button or right arrow button
to enter the menu.
4. Press the left/right arrow buttons to select the Date/
Time to be adjusted: Time is displayed in YYYY.
MM.DD HH:MM.
5. Press the up/down arrow buttons to press the value
for your selected block. After you finish your settings,
press the
button to confirm.
6. Press the
button and the following snapshot
screen appears.