77
This camera supports wireless connection for Eye-Fi
memory cards. Enable the Eye-Fi connection by following
the steps below.
1. Press the
button, press the up/down arrow
buttons to select
and press the button to enter
the menu.
2. Press the up/down arrow buttons to select
and
press the button or right arrow button to enter the
menu.
3. Press the up/down arrow buttons to select澨Eye-Fi澩
and press the
button or right arrow button to enter
the menu.
4. Press the up/down arrow buttons to select澨On澩
or澨Off澩and press the
button to confirm.
If the Eye-Fi card is not available in the camera, this
feature is not displayed.
Set Eye-Fi SD Card Connection Mode
NTSC: English, Chinese (Traditional), Japanese,
French, Korean, Russian,Hungarian, Slovakian
PAL: German, Spanish, Italian, Chinese
(Simplified), Portuguese, Swedish, Danish,
Finnish, Indonesia, Norwegian, Dutch,
Turkish, Polish, Thai, Croatian, Czech, Arabic,
Hindi
The video output system would change accordingly
based upon the changes of the selected language.
To Next Page
Loading...
