76
3. Connect the other end of the cable to an available
USB port on your computer.
4. After the transmission is complete, disconnect the
USB cable according to the instructions specifying
how to safely remove USB devices.
Video System
Use this feature to switch the video system from either
NTSC or PAL.
1. Press the
button, press the up/down arrow
buttons to select and press the button to enter
the menu.
2. Press the up/down arrow buttons to select
and
press the button or right arrow button to enter the
menu.
3. Press the up/down arrow buttons to select澨TV-
System澩and press the
button or right arrow
button to enter the menu.
4. Press the up/down arrow buttons to select 澨NTSC澩
or澨PAL澩and press the
button to confirm.
To Next Page
Loading...
