90
Message Description Solution
Remove USB Cable!
Indicates that you can disconnect
the USB cable.
The message disappears after you disconnect
the USB cable.
Connection Failed!
Failure to connect to your PC,
printer, TV (with HDMI).
Remove cable and retry connection.
Write Protect ! The memory card is locked.
Remove the memory card and switch the lever
on the side of card to UNLOCK. The message
will disappear after 2 seconds.
Card Full !
Indicates that the memory card is
full.
Replace the memory card with another that
has available memory. The message will
disappear after 2 seconds.
Memory Full !
Indicates that the camera memory
is full.
It disappears after 2 seconds.
Card Error !
During power-on, the memory card
cannot be recognized or a read/
write error occurs.
Format the memory card. WARNING:
Formatting the memory card will erase all data
on the card. Copy the data from the memory
card to another storage, such as a computer.
Otherwise, all data will be erased after the
format. The message will disappear after 2
seconds.
To Next Page
Loading...
