Kodak Astro Zoom PIXPRO AZ652

110
111
3. Press the [ ]/[ ] button to
select [USB] and press the button
to enter the menu.
4. Press the [ ]/[ ] button to
select [Printer] and press the button
to conirm.
USB
TV-System
Printer
NTSC
HDMI CEC Control
Off
Exit
Set
Select
US
B
TV-Syste
m
P
r
i
nter
NTS
C
HDMI
C
E
C
C
ontro
l
Off
E
x
it
S
et
S
elec
t
USB
PC
Printer
After the camera is reset, it will
switch to PC mode automatically
from USB mode.
See “Using the PICTBRIDGE™ Menu“
section on page 112.
PICTBRIDGE™ technology allows printing
on the photos saved in the memory card
by a printer.
To ind out if a printer is PICTBRIDGE™
compatible, simply look for the
PICTBRIDGE™ logo on the packaging
or check the owner's manual for
speciications. With the PICTBRIDGE™
function on your camera, you can
print the captured photos directly to a
PICTBRIDGE™ compatible printer using
the supplied Micro USB cable, without the
need for a PC.
Setting the USB Mode
The camera’s Micro USB port can be set
to connect with either a PC or a Printer,
the following steps will ensure that the
camera is correctly conigured to connect
with a printer.
1. Press the button, press the [ ]
/[ ] button to select and
press the button to enter the menu.
2. Press the [ ]/[ ] button to
select .
Connecting to a PICTBRIDGE™ Compatible Printer