INSTALLATION INSTRUCTIONS Safety
10MAR06
II4825-1
Page
5 of 72
Preventive Measures
• Check for an ESD WARNING LABEL before doing any procedure with ESD-sensitive
components. All sensitive components have graphic LABELS that frequently include
instructions. Use all label instructions.
• Wear a GROUNDING STRAP when you touch ESD-sensitive components. Check that the
CLIP remains fastened to a ground that has a clean surface with no paint.
• Repair components in an ESD-protection area or use a PORTABLE GROUNDING MAT.
• When moving ESD-sensitive components from area to area, insert and transport the
components in the special material made for the transport of these components.
Important
This icon is used for important information.
Note
This icon is used for additional information.
To Next Page
Loading...
Need help?
General
