Taking pictures and videos
www.kodak.com/go/support
10
Using optical zoom
Use optical zoom to get up to 12X closer to your subject. You can change optical
zoom before or during video recording.
1 Use the EVF or LCD screen to frame your subject.
2 Press Telephoto (T) to zoom in. Press Wide
Angle (W) to zoom out.
The Zoom indicator shows zoom status.
NOTE: Digital zoom is disabled when you select None in Advanced
Digital zoom (see page 46).
3 Press the Shutter button halfway to set the
exposure and focus, then completely down to
take the picture. (When taking videos, press and
release the Shutter button.)
Using digital zoom
Use digital zoom in any Still mode to get an additional 5X magnification beyond
optical zoom. Combined zoom settings are from 12X to 60X.
NOTE: To enable Advanced digital zoom, select this option in the Setup menu (page 46).
1 Press Telephoto (T) to the optical zoom limit (12X). Release the button, then press
it again.
The Zoom indicator shows zoom status.
2 Take the picture.
NOTE: You cannot use digital zoom for video recording. You may notice decreased image quality when
using digital zoom. The blue slider on the zoom indicator pauses and turns red when the picture
quality reaches the limit for an acceptable 4 x 6 in. (10 x 15 cm) print.
Digital range
Optical range
Current zoom position
Downloaded from ManualsCamera.com Manuals
To Next Page
Loading...
Need help?
General
Weight and Dimensions
