Scanning
84 www.kodak.com/go/aiosupport
6. Press to begin scanning.
The scanned file appears at the destination you specified.
7. When the message “Scan complete” appears, touch
OK.
Scan Action
File
(default)
Sends the scanned file in the format and to the
location on your computer that you designate.
Application
(available only when
Home Center
Software is installed
on computer)
Sends the scanned file to Home Center
Software.
Save as
Defaults
No / Yes To save the settings as the new default, press
OK. With Ye s selected, press OK.
Scan
Option
Settings
Description
To Next Page
Loading...
