Kodak HERO 7.1 User Manual

www.kodak.com/go/aiosupport 83
KODAK HERO 7.1 All-in-One Printer
Scanning to a computer
To scan to a computer:
1. Lift the scanner lid, and place the original face down in the right-front corner of
the scanner glass, then close the lid.
2. Close the lid.
3. Press .
4. Touch
Scan.
5. Touch
Scan to Computer or Wi-Fi Computer, then touch the setting/option you
want to change.
Scan
Option
Settings
Description
Scan To USB-connected
Computer
(default)
The scanned file is sent to the USB-connected
computer.
Name of computer
(only if a computer is
connected by
wireless or Ethernet
network)
The scanned file is sent to the computer on the
wireless or Ethernet network.
Scan What Document
(default)
Sets the scan settings for scanning a document
(see Changing the scan settings for scanning
from the control panel, page 80).
Photo
Sets the scan settings for scanning a picture
(see Changing the scan settings for scanning
from the control panel, page 80).

Kodak HERO 7.1 Specifications

General

Brand	Kodak
Model	HERO 7.1
Category	All in One Printer
Language	English