A-61679 May 2015 33
7. Go to the Content Settings tab.
8. Select a Sensitivity option.
9. Select Done to return to the Image Settings window.
NOTE: You will notice that the Side option now has two entries:
Both: Black and White (1bit) and Both: Color (24-bit).
10.Select Side: Both: Color (24-bit).
NOTE: Make any other adjustments to the color image settings on
the rest of the tabs on the Image Settings window.
11. Select Side: Both: Black and White (1-bit).
NOTE: Make any other adjustments to the black and white image
settings on the rest of the tabs on the Image Settings
window.
12.When finished, select Home to return to the main Scanner window
and then select Save to save your selections to the shortcut.
To Next Page
Loading...
