A-61679 May 2015 35
7. By default the scanner will produce the first image listed (black and
white in this example) and deliver it to the scanning application, then
it will produce and deliver the second image listed (color/grayscale
in this example). If you want the color/grayscale image to be
produced and delivered first:
• make sure Color (24-bit) is selected
• select Move up to place the color/grayscale image first in the list.
8. Select Done to return to the Image Settings window.
NOTE: You will notice that the Side option now has two entries:
Both: Color (24-bit) and Both: Black and White (1-bit).
9. Select Side: Both: Color (24-bit).
NOTE: Make any other adjustments to the color image settings on
the rest of the tabs on the Image Settings window.
10.Select Side: Both: Black and White (1-bit).
NOTE: Make any other adjustments to the black and white image
settings on the rest of the tabs on the Image Settings
window.
11. When finished, select Home to return to the main Scanner window
and then select Save to save your selections to the shortcut.
To Next Page
Loading...
