16 A-61679 May 2015
Size tab The Size tab allows you to define values relating to the image output
(i.e., cropping values, paper size, etc.).
Document — allows you to select how the scanner will detect your
document as it is being fed through the scanner.
• Automatically Detect and Straighten: the scanner will
automatically find each document (regardless of size) and will
straighten any document that may have been fed crooked.
• Automatically Detect: the scanner will automatically find each
document (regardless of size). If a document is fed crooked, it will not
be straightened.
• Manually Select: the scanner will return an image based on the area
you specify with the Outline options. It is suggested that you only use
this option for scan jobs that contain same-size documents.
Image — allows you to select which part of the document you want to
use for creating your electronic image.
• Entire document: if you select Document: Automatically Detect
and Straighten, Document: Automatically Detect or Document:
Manually Select, returns the entire document.
• Part of the document: if you select Document: Automatically
Detect and Straighten, returns the portion of the document which
you specify with the Outline options.
To Next Page
Loading...
